NOTICE: Delays may occur with Palfinger (Interlift & Eaglelift) parts over the next week or two. Please contact us to check current lead times. 214-774-4668 or [email protected]

Search

Search

THE Liftgate Parts Co. - Product Index

: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26

Interlift Pin, 25 x 205, ILK18

Maxon Dock Step Kit

Maxon GPC Mercury Switch & Cable

Tommy Gate 3/4" Replacement G2 Upright Back Arm Pin & Bushing

Waltco Pin Assy, Grease, 1.25 x 3.0

3/8-16 Threaded insert

3/8-16x1-1/4 Lg s.s.Hex Screw

5/8"SQ. Torsion Spring Kit (85Rail)

650 Pivot Latch Kit (Lever)

76-1/2" Replacment Hinge Tube (73)

8110 Replacement Motor

Anteo 12 Volt Solenoid

Anteo 12 Volt Solenoid

Anteo 2 Button Pendant Control

Anteo 2 Way Valve

Anteo 4 Way Joystick

Anteo Cut-out Battery

Anteo Electric Card 12v (Old Part #: 395829)

Anteo F3CL CIRCUIT CARD 12V

Anteo Foot Control Switch

Anteo Foot Control Switch Down

Anteo Foot Control Switch Up

Anteo Left Platform Lock

Anteo Mercury Switch

Anteo Motor and Relay 12v F3

Anteo Platform Lights

Anteo Platform Locking Left

Anteo Platform Locking Right

Anteo Remote Control - replaced by A332666

Anteo Remote Control (Blue 3 Button) Hella Plug (old part #A332650)

Anteo Remote Control (Yellow 3 Button in Triangle Formation w/Handle and Hella Plug) Old PN A332633

Anteo Right Platform Lock

Anteo Rubber Hook

Anteo Solenoir 12V (Coil for Valve Old Part #: 395346)

Anteo Tilt Cylinder Left F3CL25

Anteo Tilt Cylinder Right F3CL25

Anthony HP Hose -24" Long, 3/8 ID SAE #6

Anthony #50 DS Chain, 94" Wide AB PCR1800

Anthony #50 Roller Chain, Cut 103-1/2"

Anthony #50 Roller Chain, Cut 126" Length

Anthony #50 Roller Chain, Cut 131 1/4" Length

Anthony #50 Roller Chain, Cut 136" LG.

Anthony #60 Chain Anchor

Anthony #60 Roller Chain, Cut 113-1/2" LG

Anthony #60 Roller Chain, Cut 140"LG

Anthony #60-2 Pin & Cotter Only for Offset Link

Anthony 1/2-13 H/N GR.8 ZP

Anthony 1/4" Exterior HD Retaining Ring ZP

Anthony 1/4" x 1-3/8" Safety Snap Pin

Anthony 1/4" x 2" Cotter Pin (Replaced ATU-058)

Anthony 1: EXT HD Retaining Ring ZP

Anthony 1” Flat Washer, 1” SAE, (shim spacer)

Anthony 10-32 Nylon Insert L/N Type NM, 316 SS

Anthony 13 Tooth Sprocket

Anthony 13 Tooth Sprocket

Anthony 15/16" OD X 7/16" ID Rubber Grommet

Anthony 16-14 GA BUTT Splice (Blue)

Anthony 16-4 MRT Pump Box Wire - Spade (runner)

Anthony 16-6 MRT Pump Box Wire

Anthony 19 Tooth Sprocket

Anthony 19 Tooth Sprocket

Anthony 20" Plastic UHM Bumper Pad & Bolt (REPLACES ATU-1119)

Anthony 200 AMP "Street Wires"

Anthony 24" of Clear Plastic Return Line

Anthony 25 Tooth Sprocket

Anthony 25 Tooth Sprocket

Anthony 2-Pole Toggle Switch - Potted (P.D.)

Anthony 3" Roller Wheel (Wheel Only)

Anthony 3/8 -16 x ¾” HH Bolt ZP

Anthony 3/8 Med L/W ZP

Anthony 3/8 X 1" H/H C/S GR 8 ZP

Anthony 3/8-16 Reversible Hex L/N ZP

Anthony 3/8-16 X 1-1/4" F/H S/C/S ZP

Anthony 300in Wire - MRT

Anthony 3W/4W Valve Manifold Assy.

Anthony 44" Wedge Platform - Complete Assy

Anthony 4W/2POS Valve and Coil

Anthony 5/16-18 Finished H/N ZP

Anthony 5/8-18 Finished Hex Jam Nut GR.8 ZP

Anthony 50" Wedge Cam Assy 4 3/4" LH

Anthony 50" Wedge Cam Assy 4 3/4" RH

Anthony 6400-06MJ--06MORB Straight

Anthony 9/32" Gr. 80 Chain (MRT)

Anthony Alum P/F (90x50+12 Fixed)

Anthony Aluminum Platform Support Pin 6 3/4

Anthony Aluminum Platform, 90 x 60 + 6, AR-1200-94

Anthony Arm Weldt - LH - Closer Wheel Arm

Anthony Arm Weldt - RH - Closer Wheel Arm

Anthony Assist Spring, CS

Anthony Assist Spring, DS

Anthony Assist Spring, DS

Anthony Bolt - 5/16" x 2"

Anthony Bolt 1/2"-13 NC x 2" Long, GRD8

Anthony Bolt 3/8-16 Finished H/N ZP

Anthony Bolt 3/8-16 x 1-1/4" sqhd knurled cap s/s, zp

Anthony Bolt 5/16-18 x 1-3/4" BNHD S/C/S, SS

Anthony Bolt, 1/2-13 NC X 1-1/2" Long Grade 8

Anthony Bolt, 1/4-2o x 2 GR 8

Anthony Boot Cover w/Name & Numbers

Anthony Breather Cap

Anthony Breather Cap (For PN: A-150635 Reservoir)

Anthony Bumper Angle PCS

Anthony bushing (OLD PN ATU-150)

Anthony bushing, pin , MRT

Anthony Bushing, Retention Ramp Lock, 3/4” Long

Anthony Cable and Mount Box Switch

Anthony Cable Assy LA-60

Anthony Cam Plate Pin Assy.

Anthony Cap Screw

Anthony Cart Stop Curb Side

Anthony Cart Stop Driver Side

Anthony Cartridge & Coil

Anthony Chain Ancho Pin Runner End

Anthony Chain Anchor Pins

Anthony Chain Anchor, Housing End - #50 Chain

Anthony Chain Anchor, Runner End

Anthony Chain Glide Pad

Anthony Chain Plate for Closer Arm

Anthony Chain Shackle W/ Hose Pin

Anthony Circuit Breaker

Anthony Circuit Breaker 200 AMP

Anthony Clear Back Up Light Kit, Oval

Anthony Closure Clevis, MRT

Anthony Coil for Lowering Valve (Coil Only)

Anthony Coil Only

Anthony Column Control Assy. SK

Anthony Complete Power Unit, Gravity Down (M-319-0258)

Anthony Composite Bushing (OLD PN A-162010)

Anthony Composite Bushing (OLD PN ATU-149)

Anthony Connecting Plate Weldment - Right

Anthony Control Box and Marine Potted Switch Only GD (NEW Part# ATU-1220)

Anthony Control Box And Marine Potted Switch Only PD

Anthony Control Box Only for Toggle Switch

Anthony Control Box Only for Toggle Switch

Anthony Control Box Weldment, Thinner

Anthony Control, Raise/Lower, Low Voltage (LVC) Power Down

Anthony Cord Carrier Assy Kit (OLD PN: A-176838)

Anthony Cotter Pin 1/4" x 1-1/2" LG 316 SS

Anthony Cotter Pin 3/16 x 1-3/4

Anthony CS Double Torsion Spring

Anthony Curbside Chain AB

Anthony Cutoff Solenoid PCS

Anthony Cylinder

Anthony Cylinder

Anthony Cylinder SAE #6

Anthony Cylinder 3" Bore X 10.75" Stroke

Anthony Cylinder 4 x 10.75 DA

Anthony Cylinder ATU-3000

Anthony Cylinder DA

Anthony Cylinder, 2" Bore X 25" Stroke

Anthony Cylinder, Lift, HD Railtrac

Anthony Decal Kit- AR-1200

Anthony Dock B ASSY-12x102-HD 2 Step

Anthony DS Double Torsion Spring

Anthony Fastener Kit

Anthony Fitting

Anthony Flange Bolt 5/16 X 3.25 G8, ZP

Anthony Flat Washer, 1/2"

Anthony Flip Over - 86 X 30 +12 FIXED

Anthony Flip-Over Weldment Section 72" X 12" + 5"

Anthony Floor Extension Weldment - 81"

Anthony Flow Control Valve

Anthony Flow Control Valve

Anthony Flush Mount Control-- Steel Cup

Anthony Fold Switch

Anthony GD Handheld Control w/ Cord and Plug

Anthony Glide Strip, 3/8" UHMW Polyethylene PCS

Anthony Glide Strip, 3/8" UHMW Polyethylene PCS

Anthony Gravity Down Power Unit

Anthony Hand Held Gravity Down Remote

Anthony Hand Held Power Down Control

Anthony Handle Weldment - Left DS

Anthony Handle Weldment - Right (Curbside)

Anthony Hex Bushing

Anthony Hex Bushing

Anthony Hex Bushing (Long)

Anthony Hex Busing (Short)

Anthony Hex Pin

Anthony Hex Pin

Anthony Hex Plate

Anthony Hex Washer

Anthony Hex Washers, MRT

Anthony Hinge Pin, 3" LG

Anthony Hinge Plate - Hex Shaped Hole

Anthony Hinge Spacer

Anthony Hinge Weldment - CS

Anthony Hose - 34" LG., 1/4" ID

Anthony Hose -19" LG., 3/8" ID

Anthony Hose -30:LG, 3/8 ID

Anthony Hose Clamp for Plastic Reservoir

Anthony Hose Guide

Anthony Hydraulic Fluid Reservoir (M-319-0258) (O-Ring Not Included)

Anthony Hydraulic Hose to Closer Cylinder

Anthony Internal Pump, Monarch, For # A-130116

Anthony LA Series Cylinder

Anthony LA-86 Cable & Pin Assy

Anthony Latch Bracket FEC LA-86

Anthony Latch Handle Assembly

Anthony Latch Pin Assy (Use with ATU-557 & ATU-559)

Anthony Latch Plate

Anthony Latch Plate

Anthony Lid Cover for Battery Box

Anthony Lift Chain, D.S., for Standard Bed Height

Anthony Lift-Frame/Bushings 3000/3500

Anthony Light Block Weldment

Anthony Light Bracket - Left -2 Round - Glav

Anthony Light Bracket RH/CS - 3 Round

Anthony Light Bracket -Right -2 Round - Glav

Anthony Linkage Pivot Pin

Anthony Lockwasher, 1/2"

Anthony Long Wear Pad

Anthony Lower Cylinder Mounting Pin

Anthony Lower Lift Cylinder Pin

Anthony Main Platform

Anthony Main Platform Spring, CS

Anthony Main Platform Spring, DS

Anthony Main Weldment Arm Pin

Anthony Mercury Switch

Anthony Monarch Motor

Anthony Motor Start Solenoid 4 Post Band Mount, Old Style

Anthony MRT Closer Cylinder (part A-130198 must be ordered w/this one)

Anthony MRT Double Switch Assy.

Anthony MRT Outside Switch

Anthony MRT Power Unit Enclosure Assembly

Anthony MRT Pump Cover

Anthony MRT Runner Traveling Switch Gravity Down

Anthony MRT Torsion Spring, CS

Anthony MRT Travel Switch w/Long Cord 108 Inches (1 Day Lead Time)

Anthony MRT Traveling Switch

Anthony Nut - 5/16"

Anthony Nut 5/16-18 Center L/N ZP

Anthony Nut 5/8 -18

Anthony Oil Seal, Monarch

Anthony O-Ring (For 319-0257 Pump)

Anthony Pin & Lobe Assy., Square Hole

Anthony Pin and Bushing Kit MTU-GLR-4 (verify serial number before ordering)

Anthony Pin and Lobe Assembly (Old Part #'s AR-18-WS6L, AR-18-WS6R)

Anthony Pin Assembly

Anthony Pin Handle and Bolt

Anthony Pin Kit, ATU-1800 & ATU-2500

Anthony Pin, Chain Anchor, Runner End #60

: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26